Amazon EC2 Running Tomcat on port 80

SSH command:

#sudo /sbin/iptables -t nat -I PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080

#sudo /sbin/service iptables save

server.xml:


#service tomcat7 restart

SSH in CentOS 6.3

SSH 安裝
#sudo yum  install openssh-server openssh-clients

SSH 開機時啟動
#sudo /sbin/chkconfig sshd on

SSH 啟動
#sudo /sbin/service sshd start

防火牆設定
#sudo vi /etc/sysconfig/iptables

添加下面一行(範例 port = 22)
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT

重新啟動防火牆
#sudo /sbin/service iptables stop
#sudo /sbin/service iptables start

調整 SSH 設定
#vi  /etc/ssh/sshd_config

禁止 root 通過 SSH 登入
PermitRootLogin no

重新啟動

vsftpd 2.2 in CentOS 6.3

安裝 vsftpd
#yum install vsftpd

設定開機啟動 vsftpd ftp
#chkconfig vsftpd on

啟動服務
#service vsftpd start|restart|stop

修改 server port(注意防火牆設定是否完成)
#vi /etc/vsftpd/vsftpd.conf
在最後一行的地方加上: listen_port=21

新增 ftp 使用者
#vi /etc/vsftpd/vsftpd.conf 

拿掉以下兩個註解: 

chroot_list_enable=YES 

chroot_list_file=/etc/vsftpd.chroot_list 

增加使用者 ftpuser，指向路徑 /home/wwwroot/ftpuser, 禁止使用 SSH 權限 #useradd -d /home/wwwroot/ftpuser -g ftp -s /sbin/nologin ftpuser

(wwwroot需要先用 mkdir 的方式建立)

修改密碼

#passwd ftpuser

編輯文件chroot_list:

#vi /etc/vsftpd/chroot_list

內容為 ftp 帳號,每個帳號都佔一行:

jeff

nina

登入 ftp 後可轉換至個人目錄

#setsebool -P ftp_home_dir on

配置防火牆

編輯設置文件

#vi /etc/sysconfig/iptables

在REJECT行之前加上以下指令(範例是將 21 port 在防火牆開啟)

-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT

重新啟動防火牆

#service iptables start

Bluetooth Support Service Setting

Bluetooth Support Service Setting

Part 1 of the solution is buried in this Microsoft Knowledgebase article:

Connect a Bluetooth device that does not have or require a transceiver

And I quote:

How to make sure that the Bluetooth service is started

1. Open the Microsoft Management Console (MMC) snap-in for Services. To do this, follow these steps.
   
   
   Windows Vista or Windows 7
   1. Click Start, copy and then paste (or type) the following command in the Start Search box, and then press ENTER: services.msc
   2. In the Programs list, click Services.
      
      If you are prompted for an administrator password or for confirmation, type the password, or click Continue.
   Windows XP
   1. Click Start, and then click Run.
   2. Copy and then paste (or type) the following command in the Open box, and then press ENTER: services.msc
2. Double-click the Bluetooth Support service.
3. If the Bluetooth Support service is stopped, click Start.
4. On the Startup type list, click Automatic.
5. Click the Log On tab.
6. Click Local System account.
7. Click OK.
8. If you prompted to restart the computer, click Yes.

My log on settings were okay, but my Startup Type was set to “Manual” rather than “Automatic”. I changed it, like so:

Bluetooth Power Management Setting

But sadly, my problem wasn’t solved. So then I tried something else. I opened up Device Manager, expanded “Bluetooth Radios”, and double-clicked on the device to open its Properties page – not the enumerator, the device.

Double click the device (highlighted), not the enumerator

Go to the Power Management page and clear the checkbox “Allow the computer to turn off this device to save power”. And finally, relief! No more disconnects. Apparently there is a bug in the power management of the Bluetooth driver under Windows 7.

Uncheck 'Allow the computer to turn off this device to save power'

I can’t say for sure that the first step of making the Bluetooth Support Service automatic is necessary, or just turning off power management would fix it. It doesn’t hurt to change it to automatic so I didn’t test this. If you test it, post your results. Are both changes needed, or do you just need to turn off power management to stop losing connection?

文章來自這裡

ㄉㄨㄞㄉㄨㄞ

Nina Lin, Dazhi, Taipei, Taiwan 一個好吃懶做的米蟲，想吃就吃想睡就睡。 occpuation:公主。interests:吃飯 睡覺 打鼻鼻

XMLBeans command

install

scomp -compiler c:\java_tools\java\jdk1.7\bin\javac.exe -out 1sync_xml_datasource.jar schema/common/1.0/AttrTypes.xsd schema/common/1.0/Header.xsd schema/common/1.0/Types.xsd schema/item/1.0/CatalogueRequestProxy.xsd schema/item/1.0/ResponseProxy.xsd schema/item/1.0/Types.xsd


Install PostgreSQL 8.2.23 in CentOS 5.8

1. Download source files from here
2. Upload files to the CentOS server
3. Prepare the necessary files
1. #yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers
4. #tar -zxf postgresql-8.2.23.tar.gz
5. #cd postgresql*
6. #./configure --prefix=/usr/local/pgsql  --without-readline
7. #make && make install
8. Setting PostgreSQL config process
1. create user: #adduser postgres
2. create password: #passwd postgres
3. Authorized folder/files: 
1. #mkdir /usr/local/pgsql/data
2. #chown -R postgres /usr/local/pgsql
4. login as postgres: su postgres
5. initial dataset: /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
6. edit config
1. #vi /usr/local/pgsql/data/postgresql.conf
2. find listen_addresses = ‘localhost’ to listen_addresses = '*'
3. #vi /usr/local/pgsql/data/pg_hba.conf 
4. IPv4 local connections:
host    all         all         127.0.0.1/32          trust 
host    all         all         192.168.1.0/24      password
9. Update user env. parameters
1. #vim /var/lib/pgsql/.bash_profile
2. [ -f /etc/profile ] && source /etc/profile
3. PGDATA=/usr/local/pgsql/data
   export PATH=/usr/local/pgsql/bin:$PATH
   export PGDATA
10. Start the service
1. start SQL service: 
1. #su - postgres
2. #/usr/local/pgsql/bin/pg_ctl start -i -D /usr/local/pgsql/data
2. check SQL status: ps aux | grep postgres
3. update postgres user
1. #su - postgres
2. #psql postgres
3. #alter user postgres ENCRYPTED PASSWORD 'postgres';

Note that: you have a short cut to figure out:

command line: yum -y install postgresql postgresql-libs postgresql-server